,

Handheld Pneumatic Chuck Capper

Our Pneumatic Handheld Capper is a portable cap tightener, capable of tightening or removing screw type caps. An adjustable clutch reduces cap damage and reduces insert wear. This Capper is pressure-activated, simply started by gently pushing down on top of the capped bottle. This means no on/off switches or levers. Once the cap is tight, the chuck automatically stops and you can move onto the next bottle. The CAH-1000 includes an adjustable self-balancer with retracting line, that allows the tool to be suspended neatly and weightlessly overhead, out of the way during case changes, reducing labor fatigue. Chucks and Inserts are sold separately, configured for your products and production*. *Please specify cap size(s) for proper chuck selection when ordering. It may be necessary to purchase additional chucks for different sized caps. We recommend purchasing additional inserts to have on hand for wear replacement.

SKU: CAH-1000 Categories: ,

Spec Sheet Download

Simply click on the link below to open the pdf. If you would like to download it, please right click, and then choose save as.

Download Spec Sheet

 

Features:

  • Push to start for easy operation
  • Excellent combination of value, power and ergonomic features
  • Precision automatic stop
  • Low noise, low vibration and high accuracy
  • Reverse/forward switch
  • Excellent repeatable torque
  • CE Certified
  • Torque adjustable by tool-less external dial
CAH-1000 Specifications:

  • R.P.M.: 800
  • Torque Range : 7-35 in-lb (8-40 kgf-cm)
  • Standard Torque Deviation: /-3(%) Length: 7.1in (180mm)
  • Air Inlet Thread: ¼in
  • Weight: 0.95lb (430g)
  • Grip Diameter: 1.14in (29mm)
  • Noise Level: 72 ( /-2dBA)
  • 2-6CFM @ 90PSI clean, dry compressed air (dependent on caps and usage)
  • Bit Size: ¼in Hex

Related products

  • Automatic Capping Machine Information

    Automatic Spray Bottle Capping Machine

    The special features of the Automatic Spray Bottle Capping Machine are its ability to maintain a constant torque in the application of each cap, and to handle special applications such as fragile caps or caps with very low torque requirements. In fact the torque value of each head can be regulated from 0,02 Nm to 6,0 Nm, and can be added as a recipe by using the operator panel. Therefore, for every cap, it’s possible to memorize the correct torque value, and when necessary, to recall it by simple use of a push button function.

  • Bottle Capping Machines

    Bulk Cap Feeding Elevator

    APACKS provides a number of ergonomic solutions for your Cap Feeding needs. Our Bulk Cap Feeding Elevator reduces manual cap reloading while simultaneously maintaining efficient cap levels in any Cap Sorter. The Bulk Cap Feeding Elevator is the ideal solution for feeding any type of cap sorting device. The Hopper is located low enough for easy bulk cap loading by the Operator.

  • Bottle Capping Machines

    Semi-Automatic Chuck Capping Machine

    This semi automatic chuck capping machine was designed to be versatile and easy to use. After hand placing the caps on the bottles the capper finishes the job by diving down and tightening the cap the the desired torque.

  • Bottle Capping Machines

    Semi-Automatic Inline Capping Machines

    The CST-6000-AP Automatic Bottle Cap Tightener is fully adjustable for caps from 8 mm to 110 mm in diameter and container heights from 1 to 14 inches. Construction features a heavy duty 304 Stainless steel welded C frame with stainless steel top and bottom belt plates. No change parts needed for a wide range of containers.

Shopping Cart