,

Zero Downtime Labeler

Increase labeling efficiency with zero down-time

The ZDT-5160-PL Zero Down-Time Wrap Labeler provides an economical, self contained and easy-to-operate solution for pressure sensitive adhesive label application. Equipped with Redundant Dual Labeling Heads, the labeler is designed to prevent downtime during label roll replacement. Labeling with one head while the other is stocked with new labels ensures continuous line operation. Efficiency is key with the ZDT-5160-PL. A synchronized Servo Motor Drive allows labeling up to 200 containers per minute, based on typical 500ml round bottles.

SKU: ZDT-5160-PL Categories: ,

Spec Sheet Download

Simply click on the link below to open the pdf. If you would like to download it, please right click, and then choose save as.

Download Spec Sheet

 

Standard Features

  • Touch screen control with auto teach function for new labels
  • One touch automatic label detection and setup
  • Built-in touch screen operation manual
  • Built-in touch screen troubleshooting guide
  • Low or Missing Label Detection with automatic stop system to prevent mislabeling
  • Synchronized Servo Motor Drive
  • Synchronized label head and conveyor speeds
  • 11 degree Tilt Feature, in or out, front to back for tapered container labeling
  • Non-contact Photo Eye Sensors
  • Label Counter
  • Count Down Feature with Auto Shut-off (for precise run of set number of label
Standard Construction

  • Stainless steel & anodized aluminum
  • Max Web Width: 6” (152mm)
  • Dispensing Speed: Up to 80M/min
  • Conveyor Speed: Up to 40M/min
  • Label Roll Inside Diameter: 3” (76mm)
  • Label Roll Outside Diameter: 14” (356mm)
Dimensions

  • Length – 118.10” (3000mm)
  • Width – 51.31” (1303mm)
  • Height – 52.77” (1340mm) overall minimum
  • Typical Line Height – 36” approx.
  • Weight – 705.5lbs (320kgs)
  • Belt Width – 6 5/16in (160mm)
Electrical

  • Synchronized Servo Motor System
  • Touch screen controls
  • Power Requirement:
  • 120VAC, single phase, 50-60Hz
  • Clear Label Sensors
  • 8in or 10in Web Width Upgrade
  • Timing Screw Upgrade
  • Hot Stamp Coder Integration
  • Special electrical requirements
  • Custom applications

Related products

  • Labeling Machines Information

    Semi-Automatic Tamp Labelers

    This very affordable Semi-Automatic Tamp Label Applicator provides a reliable, industrial grade labeling system that is very simple to operate. Its design and operation draws on over 30 years of dedicated label dispenser experience.

  • Automatic Bottle Labeler Information

    Wrap Around Labeler

    The LAW-5150-PL wrap around labeler is economical, self contained and easy to operate. This automatic wrap around labeling system comes equipped with a 6-5/16 inch wide (adjustable) X 8’ long variable speed high friction conveyor. Features include a stepper motor drive for label and power assisted web take up, automatic label head and conveyor belt speed synchronization, non contact photo eye sensors, and an auto teach function for new labels.

  • Automatic Bottle Labeler Information

    Vertical Wrap Around Automatic Labeler

    The LAW-5010-PL dispenses pressure-sensitive labels at a rate of up to 150 labels per minute (LPM) with extreme accuracy. This automatic labeling system comes equipped with a 79″ variable speed conveyor. Additional features include, a stepper motor drive for label, power assisted web take up, full wrap around or tamp station, auto speed adjust (all motors synchronized), and Photo Eye (non contact) sensors for label gaps and containers.

  • Automatic Bottle Labeler Information

    Automatic Top and Bottom Labeler

    The LAA-2250-PL top and bottom labeler is economical, self contained and easy to operate. This automatic top labeling system comes equipped with a 6-5/16 inch wide (adjustable) X 4’ long variable speed high friction conveyor.

Shopping Cart